Trusted by 9000+ Contractors Nationwide
Fireproofing Estimating Services
100% Code-Compliant Takeoffs to Protect Your Margins and Safety Ratings.
Bidding on Division 07 fire protection is exceptionally cost-sensitive; a single miscalculated W/D ratio or an overlooked pipe penetration can instantly wipe out your profit margins and lead to severe compliance failures. Fireproofing estimating services calculate the precise spray-applied thickness and material volume needed to give structural steel a required fire-resistance rating, verified against the specific UL-listed assembly called out for that project. We provide industry-leading, data-driven preconstruction support engineered to eliminate the guesswork from your bidding pipeline.
Whether you require our standard 24-hour turnaround or a lightning-fast 5 to 16 hour emergency rush option, we deliver 100% accurate material quantities and code-compliant takeoffs.
Backed by an outstanding 92% bid-win ratio and transparent, flat-fee pricing starting from $200, our services empower you to instantly scale your estimating capacity while reducing your in-house overhead by up to 60%. We proudly support fireproofing subcontractors, general contractors, and structural engineers with a nationwide reach across all 50 U.S. states, explicitly highlighting heavy-volume construction markets like New York (NY), California (CA), Florida (FL), Nevada (NV), and Texas (TX).
Stop Bleeding Margin on Blanket Assumptions and Missed Penetrations
Bleeding margins often start at the conceptual phase when estimators rely on blanket thickness assumptions rather than verifying specific UL-listed assemblies and member sizes. Here is how our professional estimating team eliminates early-stage risks and protects your capital:
The Bidding Headache
Blanket Thickness Assumptions
Applying a single thickness across every column wastes material on over-protected members or leaves lighter columns dangerously under-protected relative to code.
Missed MEP Penetrations
Overlooking complex pipe, duct, and cable penetrations leaves your team absorbing the cost of expensive fire-rated sealants and collars out of pocket.
Ignoring Overspray & Touch-ups
Failing to account for material lost to overspray or damage caused by other trades working around the exposed steel drains your material budget.
High Preconstruction Overhead
Paying full-time estimators to manually cross-check hundreds of structural beams against NFPA and IBC codebooks drains your cash flow.
The Turner Solution
Member-by-Member W/D Checks
We identify each column's weight-to-heated-perimeter (W/D) ratio and match it against the UL-listed assembly table to apply the exact required thickness.
Exact Penetration Counts
We execute a meticulous fire stop takeoff that captures and itemizes every single penetration by opening count and required UL system type.
Built-In Overspray Allowances
We accurately calculate overspray margins and include specific touch-up allowances for steel exposed after other trades complete their adjacent work.
Scalable Flat-Fee Support
Our pay-per-project model cuts your fixed overhead by up to 60%, delivering elite UL rated assembly estimating data precisely when you need it.
Save 30% On Fireproofing Bidding Time
Accurate Estimates, Smarter Decisions, Bid Wins
Accurate cost planning is the single most critical factor in driving project profitability. Partnering with our elite preconstruction team turns complex life-safety plans into a solid, executable financial roadmap.
Fewer Disputes & Claims
Strengthened Bid Positions
Preventing Cost Overruns
Streamlined Workflow Planning
Strategic Outsourcing & Deliverables
Partnering with our certified estimating team to manage your takeoffs provides an immediate, long-term strategic advantage that transforms your entire bidding pipeline. When you bring us your plans, every single project is delivered with:
Comprehensive Deliverables
An editable Excel workbook containing precise material counts, volume calculations, and labor pricing, alongside color-coded marked-up PDF plans.
Total Scope Transparency
Every UL assembly, firestop collar, and structural steel member is clearly defined and cross-referenced with regional location factors.
Saved Time & Overhead
Cut your preconstruction estimating overhead by up to 60%, saving your team 20 to 30 hours per bid so you can focus on field execution and closing deals.
Reduced Material Waste
Our digital takeoff software calculates precise material volume based on thickness and surface area, eliminating massive over-ordering and site scrap.
Winning Bids
Contractors and builders who utilize our professional fireproofing data consistently report a 94% bid-win success rate.
Rapid Turnaround
Standard budgets land in 16 to 24 hours; when the bid deadline will not move, emergency rush delivery comes back in a fast 5 to 16 hours.
Custom Formatting
We seamlessly build our deliverables inside your own customized spreadsheet templates, meaning there is absolutely nothing to reformat before submission.
Comprehensive Estimating Scope
We measure and price the full Division 07 fire and smoke protection scope, ensuring every life-safety element is accounted for. We break down the specific sub-trades and services offered within this division:
Structural Steel Fireproofing
Spray-applied fire resistive materials (SFRM), intumescent coatings (IFRM), and rigid board protection for beams, columns, and joists.
Firestopping Systems
Penetration sealants, fire collars, intumescent wraps, and fire pillows for MEP (mechanical, electrical, plumbing) openings.
Fire-Rated Assemblies
Wall partitions, floor/ceiling assemblies, shaft enclosures, and garage separations.
Joint Firestopping
Construction joints, perimeter fire containment (curtain walls), and expansion joint seals.
Specialty Insulation
Mineral wool, fire-retardant treated wood, fiberglass, and cellulose insulation.
Smoke Containment & Air Barrier Systems
Complete surface and linear measurements for smoke dampers, smoke seals, draftstopping, and continuous air/vapor barrier assemblies to limit smoke and toxic gas migration.
Fire-Resistive Board & Duct Enclosures
Detailed material takeoffs for silicate, calcium silicate, and ceramic board wrapping on grease ducts, commercial kitchen exhaust, ventilation shafts, and structural steel members requiring high-durability protection.
Surface Preparation & Priming for Fireproofing
Accurate labor and coating calculations for surface cleaning, rust-inhibiting primers, bonding agents, substrate moisture testing, and protective topcoats required for SFRM and IFRM adhesion.
The Master Takeoff Element Catalog
Our professional estimators dive deeply into your structural drawings, architectural plans, and life-safety schedules to ensure absolutely nothing is overlooked. We categorize and project every major component under strictly dedicated sub-headings so you know exactly where your budget is being allocated.
Structural Steel Fireproofing
Firestopping & Penetration Seals
Intumescent Paints & Coatings
Fire-Rated Boards & Rigid Protection
Exact Material Quantification List
We measure, sequence, and document every essential material group needed to turn your life-safety blueprints into a fully compliant, inspection-ready building:
Structural member surface area (SF) by member type (columns, beams, joists).
Spray-Applied Fire Resistive Material (SFRM) volume (Bags / Units).
Intumescent fire-resistive coatings (IFRM) and primers (Gallons).
Fire caulking, intumescent sealants, and joint sprays (Linear Feet / Tubes).
Firestop collars, reusable fire pillows, and pipe wraps (EA / Rolls).
Mineral wool insulation, safing, and curtain wall insulation (SF).
Fire-rated gypsum panels and rigid calcium silicate boards (SF / Sheets).
Overspray, waste margins, and post-installation touch-up allowances.
Required thickness by fire rating (1-hr, 2-hr, 3-hr) verified per UL assembly.
Project Cost Management & Advisory
Beyond baseline material takeoffs, we offer a comprehensive suite of advisory and cost-management services to protect your assets:
- Budget Estimates
- Pre-Feasibility Studies
- Value Engineering Support
- Change Order Estimates
- Expert Witness
- Project Cost Management
- Profile Network Management
Nationwide Project Coverage
We provide compliance-ready, location-adjusted estimating services nationwide across all 50 states, utilizing advanced cost indexes tailored to active construction markets like New York (NY), California (CA), Florida (FL), Nevada (NV), and Texas (TX).
- Residential: Multi-family apartment fire partitions, condominium garage separations, and townhouse ceiling assemblies.
- Commercial: High-rise office towers, retail shopping centers, hospitality resorts, educational facilities, and hospitals with strict fire-rating requirements.
- Industrial & Heavy Civil: Warehouses, manufacturing plants, chemical processing facilities, data centers, and heavy-duty storage tank protection.
Who We Work With
Our specialized Division 07 estimating services are custom-built to support the financial decision-makers across the construction ecosystem:
- Fireproofing and firestopping subcontractors bidding structural protection.
- General Contractors coordinating fire-rated assembly compliance.
- Structural engineers verifying fireproofing thickness against design ratings.
- Owners and developers of healthcare and high-rise buildings.
- Drywall, framing, and insulation subcontractors handling fire partitions.
- Specialty MEP contractors routing through fire-rated walls.
- Architects and life-safety code consultants.
One Team on Your Projects - Start to Finish
We do not pass your complex structural plans around a chaotic bullpen to whoever happens to be free. When you partner with us, you are assigned a dedicated unit that operates as an extension of your own preconstruction department:
Dedicated Estimators
Who run the work every time, learning your specific spray application rates, preferred material suppliers, and pricing workflows so your numbers get progressively faster and sharper.
Project Managers
Assigned directly to your account to monitor design changes, track life-safety schedule revisions, and manage turnarounds so your bidding process never stalls.
Dedicated 24/7 Support
Providing lightning-fast answers, immediate code-compliance revisions, and a live human on the phone when a bid deadline is down to the wire.
Our Certifications & Professional Standards
We build every estimate to the highest standards of accuracy, ensuring absolute compliance with professional reporting structures and life-safety best practices:
The Tech Stack That Protects Your Margins
We eliminate human manual errors by utilizing advanced construction engineering software, cross-verifying every digital calculation with senior expert oversight: PlanSwift | Bluebeam Revu | RSMeans | On-Screen Takeoff | Xactimate | Trimble
How It Works
3 Steps to Your Next Win
We have designed our workflow to be simple, transparent, and completely hands-off for busy professionals:
Submit Your Plans (PDFs only)
Receive Your Quote (5-10 minutes)
Submit with Confidence (24-hour turnaround)
FAQs
Does fireproofing thickness change based on the size of the steel member?
Do you verify the UL assembly listing before pricing fireproofing?
Is firestopping at pipe and duct penetrations included with structural fireproofing?
What fire ratings do you commonly estimate?
Do fireproofing estimates account for overspray or touch-up after other trades work?
What is the difference between fireproofing and firestopping?
Do you calculate quantities for intumescent paint?
How do you handle local pricing for labor and materials?
What deliverables will I receive with my estimate?
How quickly can I get my fireproofing estimate?
Our standard turnaround time is 16 to 24 hours for most projects. If you are facing a strict bid deadline, we also offer an expedited rush service delivered in 5 to 16 hours.
Can you estimate fireproofing for industrial facilities and warehouses?
Is there a long-term contract required to use your services?
Secure Your Bids With Guaranteed Precision
Stop risking your profit margins on blanket thickness assumptions, omitted pipe penetrations, and manual measuring errors. Outsource your fireproofing and firestopping takeoffs to our certified estimators, slash your overhead by up to 60%, and bid with absolute confidence. Send us your blueprints now, and get a precise cost roadmap ready for your crews and safety inspectors.